Taurus FWD V6-3.5L (2008)
5. Install the side air bag module backrest trim cover chute and J-clips around the side air bag module and backrest frame. Attach the chute J-clips.
6. Attach the J-clips at the back of the backrest trim cover.
7. Attach the hook-and-loop strips, roll the backrest trim cover down and install the second row of hog rings in the front.
8. Attach the hook-and-loop strips, roll the backrest trim cover down and install the first row of hog rings in the front.
-
If passenger seat, pull the backrest latch fold-flat release strap through the backrest trim cover bezel opening.
9. Attach the backrest trim cover lower J-clip.
10. If equipped, install the lumbar adjust handle and screw.
11. NOTE: The head restraint guides are not interchangeable.
Install the head restraint guides.
12. Install the head restraint.
13. Repower the SRS.