Taurus FWD V6-3.5L (2008)
CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash
it with water.
CAUTION: Electronic modules are sensitive to electrical charges. The anti-lock brake system (ABS) module can be damaged if exposed to
these charges.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the ABS electrical connector.
3. NOTE: Brake tubes must be installed in their original locations.
Loosen the brake tube-to-hydraulic control unit (HCU) fittings and position the brake lines aside.
^
To install, tighten to 17 Nm (13 lb-ft).
4. Loosen the 2 bracket-to-HCU nuts and remove the HCU.
^
To install, tighten to 8 Nm (71 lb-in).
5. To install, reverse the removal procedure.
^
Bleed the brake system.