Taurus FWD V6-3.5L (2008)
2. Measure the ball gauge with a micrometer.
3. If the valve guide is not within specifications, install a new cylinder head assembly.
Valve Stem to Valve Guide Clearance
Special Tool(s)
NOTE: Refer to the appropriate specification.
NOTE: The valve stem diameter must be within specifications before checking valve stem-to-valve guide clearance.
1. NOTE: If necessary, use a magnetic base.
Install a Valve Guide Clearance Gauge on the valve stem and install a Dial Indicator Gauge with Holding Fixture. Lower the valve until the
clearance gauge contacts the upper surface of the valve guide.