ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 8252 > < Initial Inspection and Diagnostic Overview|Page 8250
Page 12
background image

F3-F4

Test G: The Puddle Lamp(s) Are Inoperative

PINPOINT TEST G: THE PUDDLE LAMP(S) ARE INOPERATIVE

Normal Operation

The smart junction box (SJB) provides voltage to the puddle lamps through circuit CLN25 (VT). The puddle lamps have separate ground circuits. The
LH exterior mirror is grounded through circuit GD133 (BK), and the RH exterior mirror is grounded through circuit GD148 (BK/YE).

DTC B2A39 (Puddle Lamp Output Circuit Open) - is an on-demand DTC that sets when the SJB detects an open on the puddle lamp output circuit.

DTC B2A3A (Puddle Lamp Output Circuit Short To Ground) - is a continuous and on-demand DTC that sets when the SJB detects a short to ground
on the puddle lamp output circuit. This DTC also sets as a result when the SJB fuse 10 (15A) has failed or is removed.

This pinpoint test is intended to diagnose the following:

-

Fuse

-

Wiring, terminals or connectors

-

Exterior mirror

-

Puddle lamp

-

SJB

Initial Inspection and Diagnostic Overview|Page 8252 > < Initial Inspection and Diagnostic Overview|Page 8250