Taurus FWD V6-3.5L (2008)
F3-F4
Test G: The Power Steering Control Module Does Not Respond To The Scan Tool
PINPOINT TEST G: THE POWER STEERING CONTROL MODULE DOES NOT RESPOND TO THE SCAN TOOL
Normal Operation
The power steering control module communicates with the scan tool through the high speed controller area network (HS-CAN). Circuits VDB04
(WH/BU) (HS-CAN +) and VDB05 (WH) (HS-CAN -) provide the network connection to the power steering control module. The power steering
control module shares the HS-CAN network with the PCM, the ABS module, the restraints control module (RCM), the occupant classification sensor
(OCS) module, the four wheel drive (4WD) control module and the instrument cluster. Voltage for the power steering control module is provided by
circuits SBP13 (GY/RD) and CBP35 (YE/GY) and circuit GD148 (BK/YE) provides ground.
This pinpoint test is intended to diagnose the following:
-
Fuse
-
Wiring, terminals or connectors
-
Power steering control module