Taurus FWD V6-3.5L (2008)
O3-O4
Test P: No Power To The Scan Tool
PINPOINT TEST P: NO POWER TO THE SCAN TOOL
Normal Operation
The scan tool is connected to the data link connector (DLC) to communicate with the high speed controller area network (HS-CAN), medium speed
controller area network (MS-CAN), and International Standards Organization (ISO) 9141 communication network. Voltage for the scan tool is
provided by circuit SBP20 (GN/RD). Ground is provided by circuit GD111 (BK/BU).
This pinpoint test is intended to diagnose the following:
-
Fuse
-
Wiring, terminals or connectors
-
Scan tool
P1
