Taurus FWD V6-3.5L (2008)
retractor assembly, refer to Safety Belt Retractor - Rear, Center, Taurus, Sable. See: Seat Belt Retractor/Service and Repair/Safety Belt Retractor - Rear,
Center
1. Remove the rear seat cushion.
2. Remove the nut and the LH and center safety belt buckle assembly.
-
To install, tighten to 48 Nm (35 lb-ft).
3. NOTE:
-
Be sure to route the safety belt buckle through the opening provided in the seat cushion when reinstalling.
-
The anti-rotation tab must be correctly aligned for correct installation.
To install reverse the removal procedure.
4. Check the active restraint system for correct operation.
