Taurus FWD V6-3.5L (2008)
13. Remove and discard the 4 upper strut mount nuts.
^
To install, tighten to 30 Nm (22 lb-ft).
14. Remove the wheel knuckle and the strut and spring as an assembly.
15. Remove and discard the strut-to-wheel knuckle nut and flagbolt.
^
To install, tighten to 175 Nm (129 lb-ft).
16. Separate the strut and spring assembly from the wheel knuckle.
17. To install, reverse the removal procedure.
