Taurus X AWD V6-3.5L (2009)
Front Door Interior Handle: Service and Repair
Interior Door Handle
Interior Door Handle
Removal
1. Remove the door trim panel.
2. Remove the bolt and position the interior door handle aside.
3. Disconnect the interior door handle actuating cable and remove the interior door handle.
Installation
1. Connect the interior door handle actuating cable to the interior door handle.
2. Position the interior door handle and install the bolt. Do not tighten the bolt.
3. NOTE: Make sure that the door trim panel alignment clip is installed in the interior door handle.
Install the door trim panel.
-
Install the door trim panel.
-
Tighten the interior door handle bolt to 7 Nm (62 lb-in).
-
Install the door handle bezel.
