Taurus X AWD V6-3.5L (2009)
Rear Door Window Motor: Service and Repair
Window Regulator Motor - Rear Door
Window Regulator Motor - Rear Door
Removal and Installation
1. Remove the rear door trim panel.
2. Remove the door speaker.
3. Rotate the lock rod downward to align the shaft with the slot in the door lock linkage.
4. Slide the lock rod out of the door lock linkage.
5. Disconnect the door lock and rear window motor electrical connectors.
6. Remove the 3 door latch screws.
7. Remove the access hole cover.
8. NOTE: If the door window regulator motor is inoperative, remove it. For additional information, refer to Window Regulator Motor See: Front
