Taurus X AWD V6-3.5L (2009)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Liftgate Trim Panel
Removal and Installation
Vehicles with a power liftgate
1. Remove the power liftgate rod retaining nut cover.
2. Remove the power liftgate rod retaining nut.
-
To install, tighten to 11 Nm (97 lb-in).
3. Remove the power liftgate rod from the liftgate.
All vehicles
4. Remove the liftgate upper trim panel.
-
Pull the liftgate upper trim panel toward the middle of the liftgate window glass to release the retaining clips.
5. Remove the 4 liftgate trim screws.