ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Roof Opening Panel - Exploded View|Page 6929 > < Roof Opening Panel - Exploded View
Page 1
background image

Sunroof / Moonroof Track: Service and Repair
Trough Assembly

Trough Assembly - Taurus X

Removal and Installation

1. Remove the roof opening panel glass. For additional information, refer to Roof Opening Panel Glass  See: Sunroof / Moonroof Panel/Service and

Repair/Roof Opening Panel Glass.

2. With roof opening glass removed, position the roof opening panel to the CLOSED position.

3. If equipped, remove the rear entertainment system.

4. Remove the A-pillar trim panels.

5. Remove the LH and RH B-pillar trim panels.

6. Remove the LH and RH C-pillar trim panels.

7. Remove the LH and RH D-pillar trim panels.

8. Remove the 3 assist handles.

9. Remove the LH and RH sun visors and sun visor clips.

10. If equipped, disconnect the interior auto-dimming electrical connector.

11. If equipped, disconnect the compass sensor electrical connector.

12. Partially lower the front of the headliner and disconnect the roof opening panel electrical connector.

13. Disconnect the electrical connector located on the A-pillar.

-

Remove the wiring harness pin-type retainers.

14. Disconnect the electrical connector located on the LH and RH A-pillars.

-

Remove the wiring harness pin-type retainers.

15. NOTE: Plug the rear window washer hose to avoid washer fluid leakage.

Disconnect the rear window washer hose connector located on the RH A-pillar.

16. NOTE: Plug the rear window washer hose to avoid washer fluid leakage.

Disconnect the rear window washer hose connector and the electrical connector located on the RH D-pillar.

17. Disconnect the electrical connector located on the LH D-pillar.

Roof Opening Panel - Exploded View|Page 6929 > < Roof Opening Panel - Exploded View