Taurus X AWD V6-3.5L (2009)
5. Install the side air bag module backrest trim cover chute and J-clips around the side air bag module and backrest frame. Attach the chute J-clips.
6. Attach the J-clips at the back of the backrest trim cover.
7. Attach the hook-and-loop strips, roll the backrest trim cover down and install the second row of hog rings in the front.
8. Attach the hook-and-loop strips, roll the backrest trim cover down and install the first row of hog rings in the front.
-
If passenger seat, pull the backrest latch fold-flat release strap through the backrest trim cover bezel opening.
9. Attach the backrest trim cover lower J-clip.
10. If equipped, install the lumbar adjust handle and screw.
11. Install the head restraint guides.
12. Install the head restraint.
13. Repower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering in the General
Procedures of Air Bag Systems.
Seat Cushion Cover - Front
Seat Cushion Cover - Front
Removal
WARNING: Never probe the electrical connectors on safety belt buckle/retractor pretensioners or adaptive load limiting retractors. Failure to
follow this instruction may result in the accidental deployment of the safety belt pretensioners or adaptive load limiting retractors, which
increases the risk of serious personal injury or death.
