Taurus X AWD V6-3.5L (2009)
Parking Brake Cable: Removal and Replacement
Parking Brake - Exploded View
Parking Brake - Exploded View
1. For additional information, refer to the procedures.
Parking Brake Cable - Intermediate
Parking Brake Cable - Intermediate
Removal and Installation
1. Relieve the parking brake cable tension. For additional information, refer to Parking Brake Cable Tension Release See: Procedures.
2. Remove the 3 parking brake cable bracket bolts from the subframe.
-
To install, tighten to 12 Nm (106 lb-in).
3. Disconnect the intermediate cable from the front cable at the cable-to-cable union.
4. Release the intermediate cable from the body bracket.
5. Release the intermediate cable from the rear RH cable at the cable-to-cable union.
