ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Procedures|Page 1621 > < Procedures|Page 1619
Page 8
background image

All camshafts

41. Remove the drain plug and drain the engine oil.

-

Install the drain plug and tighten to 27 Nm (20 lb-ft).

42. Remove and discard the engine oil filter.

43. Remove the Power Steering Pressure (PSP) tube bracket-to-steering gear bolt.

44. Remove the bolt, rotate the clamp plate clockwise and disconnect the PSP tube from the steering gear.

-

Discard the O-ring seal.

45. Remove the 2 engine roll restrictor-to-transaxle bolts.

46. NOTE: RH shown, LH similar.

Procedures|Page 1621 > < Procedures|Page 1619