Taurus X AWD V6-3.5L (2009)
21. Reset the primary timing chain tensioner.
-
Rotate the lever counterclockwise.
-
Using a soft-jawed vise, compress the plunger.
-
Align the hole in the lever with the hole in the tensioner housing.
-
Install a suitable lockpin.
22. NOTE: It may be necessary to rotate the crankshaft slightly to remove slack from the timing chain and install the tensioner.
Install the primary tensioner and the 2 bolts.
-
Tighten to 10 Nm (89 lb-in).
-
Remove the lockpin.
23. As a post-check, verify correct alignment of all timing marks.