Taurus X AWD V6-3.5L (2009)
-
Tighten to 10 Nm (89 lb-in).
72. Connect the transaxle cooler tubes and install the 2 secondary latches.
73. Using the Powertrain Lift, raise the subframe into the installed position.
74. NOTE: RH shown, LH similar.
Install the 2 front subframe bolts.
-
Tighten to 150 Nm (111 lb-ft).
75. NOTE: RH shown, LH similar.
Position the subframe brackets and install the 4 bolts finger-tight.
76. NOTE: RH shown, LH similar.
Install the 2 rear subframe bolts.
-
Tighten to 150 Nm (111 lb-ft).