Taurus X AWD V6-3.5L (2009)
Connecting Rod Large End Bore
Connecting Rod Large End Bore
NOTE: Refer to the Engine system level for the specification.
1. Tighten the bolts to specification, then measure the bore in 2 directions. The difference is the connecting rod bore out-of-round. Verify the
out-of-round is within specification.
Connecting Rod to Crankshaft Side Clearance
Connecting Rod to Crankshaft Side Clearance
NOTE: Refer to the Engine system level for the specification.
1. Using the Feeler Gauge Set, measure the clearance between the connecting rod and the crankshaft. Verify the measurement is within specification.
Connecting Rod Twist
Connecting Rod Twist