Taurus X AWD V6-3.5L (2009)
9. NOTE: Make sure the 2 locating dowel pins are seated correctly in the cylinder block.
Install the engine front cover and bolts 17, 18, 19 and 20.
-
Tighten in sequence shown to 3 Nm (27 lb-in).
10. Remove the Alignment Pins.
11. NOTE: Do not tighten the bolts at this time.
Install the engine mount bracket and the 3 bolts.
12. NOTICE: Do not expose the Motorcraft High Performance Engine RTV Silicone to engine oil for at least 90 minutes after installing the
engine front cover. Failure to follow this instruction may cause oil leakage.
