Taurus X AWD V6-3.5L (2009)
Exhaust Manifold: Specifications
Install 6 new RH exhaust manifold studs.
Tighten to....................................................................................................................................................................................................12 Nm (106 lb-in).
Using a new gasket, install the RH exhaust manifold and 6 new nuts. Tighten in 2 stages in the sequence shown:
Stage 1: Tighten to......................................................................................................................................................................................20 Nm (177 lb-in).
Stage 2: Tighten to.........................................................................................................................................................................................25 Nm (18 lb-ft).
Install 6 new LH exhaust manifold studs.
Tighten to....................................................................................................................................................................................................12 Nm (106 lb-in).
Using a new gasket, install the LH exhaust manifold and 6 new nuts. Tighten in 2 stages in the sequence shown:
Stage 1: Tighten to......................................................................................................................................................................................20 Nm (177 lb-in).
Stage 2: Tighten to.........................................................................................................................................................................................25 Nm (18 lb-ft).
