Taurus X AWD V6-3.5L (2009)
Removal and Installation
NOTE: The LH temperature blend door actuator can be accessed from below the LH side of the instrument panel.
1. Remove the 2 LH temperature blend door actuator screws.
2. Disconnect the LH temperature blend door actuator electrical connector.
3. Remove the LH temperature blend door actuator.
4. To install, reverse the removal procedure.
Auxiliary Mode Door Actuator
Auxiliary Mode Door Actuator
Removal and Installation
1. Remove the LH quarter trim panel.
2. Disconnect the auxiliary mode door actuator electrical connector.
3. Remove the 2 auxiliary mode door actuator screws.
4. Remove the auxiliary mode door actuator.