ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 7707 > < Initial Inspection and Diagnostic Overview|Page 7705
Page 5
background image

-

Disconnect: SJB C2280b.

-

Measure the resistance between the instrument panel dimmer switch C2065-5, circuit CLN28 (GN/BU), harness side and ground.

-

Is the resistance greater than 10,000 ohms?

Yes

GO to B14.

No

REPAIR the circuit. CLEAR the DTCs. REPEAT the self-test.

-------------------------------------------------
B7 CHECK CIRCUIT VLN33 (GY/VT) FOR A SHORT TO VOLTAGE

-

Ignition OFF.

-

Disconnect: SJB C2280a.

-

Ignition ON.

-

Observe the courtesy lamps.

-

Are the courtesy lamps still illuminated?

Yes

REPAIR the circuit. CLEAR the DTCs. REPEAT the self-test.

No

GO to B14.

-------------------------------------------------
B8 CHECK CIRCUIT GD147 (BK/VT) FOR AN OPEN (MANUAL LIFTGATE)

-

Ignition OFF.

-

Disconnect: Negative Battery Cable.

-

Disconnect: Liftgate Latch C4185.

-

Measure the resistance between the liftgate latch C4185-3, circuit GD147 (BK/VT), harness side and ground.

-

Is the resistance less than 5 ohms?

Yes

GO to B9.

No

REPAIR the circuit. CLEAR the DTCs. REPEAT the self-test.

Initial Inspection and Diagnostic Overview|Page 7707 > < Initial Inspection and Diagnostic Overview|Page 7705