Taurus X AWD V6-3.5L (2009)
Inertia Fuel Shutoff Switch: Service and Repair
Inertia Fuel Shutoff (IFS) Switch
Removal and Installation
1. Remove the RH cowl side trim panel.
2. Disconnect the Inertia Fuel Shutoff (IFS) switch electrical connector.
3. NOTICE: Do not overtighten the fasteners or damage to the switch will occur.
Remove the 2 bolts and the IFS switch and bracket assembly.
-
To install, tighten to 4 Nm (35 lb-in).
4. To install, reverse the removal procedure.
