Taurus X AWD V6-3.5L (2009)
NOTE: Install the studbolts in the locations noted during disassembly.
Install the main control cover and loosely install the 14 bolts.
1. Bolt location
2. Studbolt location
13. Tighten the main control cover bolts in the sequence shown.
-
Tighten to 12 Nm (106 lb-in).
14. Position the transmission fluid cooler thermal bypass valve and transmission fluid cooler tube assembly in place and install the 2 nuts.
-
Tighten to 9 Nm (80 lb-in).
15. Connect the transaxle electrical connector and install the wiring harness fastener on the main control cover stud.
