Taurus X AWD V6-3.5L (2009)
12. Release the hook-and-loop strips and carefully roll up the seat back trim cover to the second row of hog rings in the front.
13. Release the J-clips at the back of the seat cushion trim cover.
14. Release the side air bag module backrest trim cover chute J-clip from around the side air bag module cover.
15. Feed the side air bag module backrest trim cover chute and J-clip retainer out through the side air bag module backrest foam pad opening.
16. Release the hook-and-loop strip, and then invert the trim cover to the third row of hog rings and remove the front and rear hog rings (backside hog
rings shown).
17. NOTE: Manual lumbar adjust shown, power lumbar adjust similar.
Remove the hog rings attaching the lumbar basket (if equipped) or backrest support (if equipped) and foam pad to the backrest frame and then
