Taurus X AWD V6-3.5L (2009)
3. Remove the safety belt buckle pretensioner.
-
Remove the nut.
To install, tighten to 50 Nm (37 lb-ft).
-
Route the wiring harness from the seat track and cushion frame.
-
Remove the safety belt buckle pretensioner.
4. To install, reverse the removal procedure.
5. Install the seat.
6. Check the active restraint system for correct operation. For additional information, refer to the appropriate Functional Test procedure in Safety
Belt System See: Testing and Inspection/Component Tests and General Diagnostics.