Taurus X AWD V6-3.5L (2009)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor - Front
Wheel Speed Sensor - Front
Removal and Installation
1. Remove the wheel and tire.
2. Disconnect the wheel speed sensor electrical connector.
3. Remove the 2 scrivets and position aside the fender splash shield.
4. Remove the wheel speed sensor harness pin-type retainer.
5. Remove the 2 wheel speed sensor harness retainers.
6. Remove the bolt and the wheel speed sensor.
-
To install, tighten to 15 Nm (133 lb-in).
7. To install, reverse the removal procedure.
