Taurus X AWD V6-3.5L (2009)
3. NOTE:
-
Make sure the arrow on the Rear Drive Unit (RDU) Bushing Remover/Installers is visible on the bottom and facing away from the subframe.
The arrow must remain straight so that the bushings are correctly indexed into the subframe.
-
When installing the RDU bushing, Rear Drive Unit (RDU) Bushing Remover/Installers 204-616/2 will fall away as the RDU bushing is
installed into the subframe. The Rear Drive Unit (RDU) Bushing Remover/Installers do not control the depth of the bushing. The RDU
bushing is fully seated when the special tool falls away from the subframe, do not continue to tighten the Rear Drive Unit (RDU) Bushing
Remover/Installers.
Install the RDU bushing into the subframe.
4. Install the RDU.
