Taurus X AWD V6-3.5L (2009)
11. Raise the floor jack until the center of the wheel hub is at the correct curb height (measured in Step 1 of the Removal procedure).
12. Tighten the trailing arm-to-wheel knuckle bolt to 105 Nm (77 lb-ft).
13. Tighten the trailing arm-to-subframe bolt to 110 Nm (81 lb-ft).
14. Remove the floor jack and the jackstands.
15. Position the brake caliper and install the brake caliper anchor plate bolts.
-
Tighten to 110 Nm (81 lb-ft).
16. Install the wheel and tire.
Wagons
17. Install the third row safety belt anchor-to-floor bolt trim cover.
Sedans
18. Install the luggage compartment rear and side trim panels.
