Taurus X AWD V6-3.5L (2009)
21. NOTE: Note the location of the different length bolts for assembly.
Remove the 11 bolts and the solenoid body.
22. NOTICE: Do not handle the solenoid body in the leadframe area or by the screens of the solenoid body filter or damage to the solenoid
body may occur.
NOTICE: Use care not to break the alignment tabs when installing the solenoid body filter. Damage to the transaxle will occur if the
solenoid body is not correctly aligned.
Remove the solenoid body filter assembly by pulling it straight up from the alignment tabs. Discard the filter.
23. Remove the 10 bolts, the TR sensor detent spring and the main control valve body.
24. Using a suitable tool, remove and discard the TR sensor locking pin.
