Taurus X AWD V6-3.5L (2009)
Vehicles equipped with a TCS
8. Disconnect the TCS connector, route the wiring harness out of the selector lever bezel and remove the selector lever knob and knob bezel.
All vehicles
9. Remove the selector lever bezel.
Installation
All vehicles
1. NOTE: Do not lock the 4 selector lever bezel tabs in the selector lever bezel.
Position the selector lever bezel on the selector lever.
Vehicles equipped with a TCS
2. Route the TCS wiring harness through the selector lever bezel and connect the TCS connector.
All vehicles
3. Install the selector lever bezel light in the selector lever bezel.
4. NOTE: Selector lever removed for clarity.
Position the selector lever bezel in place.
-
Be sure the 4 tabs are locked in place.