Taurus X AWD V6-3.5L (2009)
15. Tighten the engine roll restrictor-to-subframe through bolt.
-
Tighten to 90 Nm (66 lb-ft).
16. Install new exhaust seals, position the exhaust Y-pipe assembly in place and install 4 new exhaust Y-pipe assembly nuts.
-
Tighten to 40 Nm (30 lb-ft).
17. Install a new exhaust seal, position the Y-pipe in the exhaust hanger and install 2 new exhaust flange nuts.
-
Tighten to 40 Nm (30 lb-ft).
