Taurus X AWD V6-3.5L (2009)
Door Window Motor/Service and Repair/Window Regulator Motor.
Lower the window until the glass clamp bolt is accessible through the access hole plug, then loosen the glass clamp bolt.
-
To install, tighten to 9 Nm (80 lb-in).
9. Tape the window glass in position.
10. Disconnect the 5 wiring harness retainers and the wiring harness grommet.
11. Remove the interior door handle bolt.
-
To install, tighten to 7 Nm (62 lb-in).
12. Remove the 8 bolts from the door module.
-
To install, tighten to 8 Nm (71 lb-in).
13. Feed the wiring harness and grommet, and the interior door handle and cable through the openings in the rear door module, then remove the door
module.
14. To install, reverse the removal procedure.
