Taurus X FWD V6-3.5L (2008)
20. Remove the liftgate opening weatherstrip.
21. Remove the 3 headliner pin-type retainers from the rear of the headliner.
22. CAUTION:
-
Make sure to correctly protect (masking tape) the headliner to avoid damage to the headliner from the exposed weatherstrip butyl.
-
Some bending of the headliner edges may be required to fit the A-pillar and D-pillar areas through the liftgate opening. If it is
necessary to bend the headliner, always bend away from the fabric surface to avoid creasing the headliner surface.
Remove the headliner.
-
Lower the headliner.
-
Remove the headliner through the liftgate opening.
23. To install, reverse the removal procedure.