Taurus X FWD V6-3.5L (2008)
3. Remove the C-pillar trim panel.
4. Remove the D-pillar trim panel.
5. Position aside the bottom portion of the LH or RH rear door weatherstrip.
6. Position the rear portion of the scuff plate trim panel aside to gain access to the quarter trim panel retaining screw.
7. Remove the quarter trim panel retaining screw.
8. Position the second row seats in the flat position and then tilt the second row seats forward.
9. Position the third row seats in the flat position.
10. Remove the cargo net retaining hooks.
Vehicles with a power liftgate
11. Remove the power liftgate rod retaining nut cover.
12. Remove the power liftgate rod retaining nut.
-
To install, tighten to 11 Nm (8 lb-ft).
13. Remove the power liftgate rod from the liftgate.
14. Remove the power liftgate rod cover.
-
Pull the power liftgate rod cover outward to release the power liftgate rod cover clips.
-
Disconnect the electrical connector.
