Taurus X FWD V6-3.5L (2008)
-
Tighten to 48 Nm (35 lb-ft).
7. Reposition the cushion foam pad and cushion trim cover to the cushion frame.
8. Insert the cushion trim cover LH retainer back between the riser and the cushion frame.
9. From under the seat, attach the cushion trim cover J-clip at the RH side of the cushion frame.
10. From under the seat and at the back, between the cushion foam pad and frame, attach the cushion trim cover J-clip to the seat cushion frame.
11. From under the seat, attach 3 sets of cushion trim cover J-clips.
12. Install the 60 percent seat into the vehicle.
40 Percent
SEAT BACKREST - SECOND ROW, 40 PERCENT
Exploded View
