Taurus X FWD V6-3.5L (2008)
Manual-fold seat
4. Place the seat in the E-Z entry position.
All seats
5. Release the outer and inner J-clips at the rear of the cushion trim cover.
6. Release the 2 cushion trim cover side retainers and remove from between the cushion frame and seat track.
-
Un-curl the retainer ends and push through the opening between the cushion frame and riser/seat track.
7. Manually lock the inboard seat-to-floor latch and raise the backrest.
-
For manual-fold seat, lower and lock the seat to the floor.
8. Invert and remove the cushion trim cover from the cushion foam pad.
-
Route the bottom trim cover flap through the seat track adjust handle.
-
Remove the hog rings.
-
Carefully route the cushion trim cover rear flap from between the backrest and cushion.
9. To install, reverse the removal procedure.
-
Make sure the child safety seat attaching points are accessible.
