Taurus X FWD V6-3.5L (2008)
7. Disconnect the OCSM electrical connector.
Seats with an OCS system service kit
8. Disconnect the OCS system service kit electrical connector.
Power seats with an OCS system service kit
9. Remove the tie strap retaining the unused pressure sensor electrical connector from the seat wiring harness.
All seats
10. CAUTION: Do not oversize the seat cushion frame holes used to rivet the OCSM in place. Failure to follow this instruction may result in
component damage and/or system failure.
NOTE: OE OCSM shown, OCS system service kit is similar.
