Taurus X FWD V6-3.5L (2008)
Part 2
1. Remove the third row bench seat.
2. Remove the third row bench backrest.
3. Pull to release and remove the LH backrest latch outboard cover.
-
Pull the release strap through the trim cover.
4. Remove the 3 screws and remove the LH backrest latch inboard cover.
-
Pull the release strap through the trim cover.
5. Pull to release and remove the RH backrest latch outboard cover.
6. Remove the 3 screws and remove the RH backrest latch inboard cover.
7. NOTE: If damaged when removed, install new plastic rivets.
Remove the 2 rivets and pull the cushion handle out of the pocket.
-
Using an appropriate tool, from under the rivet head, pry the rivet up.
-
When removing the plastic rivet, make sure not to get under the insert or the rivet will not come out.
-
Another method that can be used to remove the plastic rivets is to drive a screw partially into the rivet head and pull the screw and rivet head
out. This will require new plastic rivets be installed.