Taurus X FWD V6-3.5L (2008)
15. Separate the cable, remove 2 bolts and the LH backrest latch.
-
To install, tighten to 50 Nm (37 lb-ft).
16. Remove 2 bolts, route the cable out of the cushion frame and remove the RH backrest latch.
-
To install, tighten to 50 Nm (37 lb-ft).
17. Remove the 2 bolts from the LH floor latch.
-
To install, tighten to 23 Nm (17 lb-ft).
18. Remove the 2 bolts from the RH floor latch and remove the floor latch assembly.
-
To install, tighten to 23 Nm (17 lb-ft).
