Taurus X FWD V6-3.5L (2008)
All wheel drive (AWD) vehicles
72. NOTE: A new powertrain transfer unit (PTU) seal must be installed whenever the intermediate shaft is removed.
Install a new PTU seal.
All camshafts
73. Install the RH halfshaft support bracket and the 4 bolts.
^
Tighten the halfshaft support-to-cylinder block bolts to 40 Nm (30 lb-ft).
^
Tighten the catalytic converter-to-halfshaft support bolts to 20 Nm (15 lb-ft).
74. Install the 2 halfshaft support bracket studs.
^
Tighten to 10 Nm (89 lb-in).
75. Install the RH halfshaft into the transaxle and the wheel hub and install the 2 carrier bearing nuts.
^
Tighten to 40 Nm (30 lb-ft).
