ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Deactivation Indicator|Diagrams|Page 5985 > < Air Bag Deactivation Indicator|Diagrams
Page 1
background image

Air Bag Deactivation Indicator: Service and Repair

PASSENGER AIR BAG DEACTIVATION (PAD) INDICATOR

Removal and Installation

WARNING:  To reduce the risk of accidental deployment, do not use any memory saver devices. Failure to follow this instruction may result in
serious personal injury or death.

NOTE:

-

The air bag warning indicator illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal
operation and does not indicate a supplemental restraint system (SRS) fault.

-

Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and carry out the diagnostic
procedure again.

-

The SRS must be fully operational and free of faults before releasing the vehicle to the customer.

1. Depower the SRS.
2. Gently pull outward to release the clips on the instrument panel center finish panel.

Air Bag Deactivation Indicator|Diagrams|Page 5985 > < Air Bag Deactivation Indicator|Diagrams