Taurus X FWD V6-3.5L (2008)
Part 2
Removal and Installation
1. Remove the battery tray.
2. Remove the bolt and position the battery cable body ground terminal aside.
-
To install, tighten to 12 Nm (9 lb-ft).
3. Remove the nut and position the battery junction box (BJB) cable terminal aside.
-
To install, tighten to 8 Nm (71 lb-in).
4. Remove the starter solenoid terminal cover.
5. Remove the nut and position the battery cable starter solenoid terminal aside.
-
To install, tighten to 12 Nm (9 lb-ft).
6. Remove the nut and position the battery cable starter motor terminal aside.
-
To install, tighten to 12 Nm (9 lb-ft).
7. Release the battery cable locator from the engine.
8. Remove the bolt and position the battery cable engine ground terminal aside.
-
To install, tighten to 12 Nm (9 lb-ft).