Taurus X FWD V6-3.5L (2008)
4. Using the jack, raise the transaxle and install the transaxle support insulator through bolt.
^
Tighten to 175 Nm (129 lb-ft).
5. Remove the jack and the special tool.
6. Install the battery tray and bracket and connect the PDB fasteners and install the 2 battery tray bolts.
^
Tighten to 9 Nm (80 lb-inch).
7. Install the 2 lower battery tray bracket bolts.
^
Tighten to 9 Nm (80 lb-inch).
