Tempo L4-122 2.0L DSL (1984)
Control arm to spindle bolt torque spec 80-115 N-m (60-86 lb.ft.). Control arm to body bolt torque spec 55-75 N-m (40-55 lb.ft.).
6.
Remove the alignment heads and drive vehicle off the alignment rack.
7.
It should also be noted that any change in rear toe settings may require resetting the steering wheel spoke angle. Spoke angle should be corrected
by adjustment of the front toe.
OTHER APPLICABLE ARTICLES: 84-16-13
ARTICLE SUPERSEDED: 84-3-11
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP3002A84-Check Rear Toe Alignment
TIME:
0.4 Hr.
OPERATION: SP3002A184-Correct Rear Toe
TIME:
One Side - 0.3 Hr. Both Sides - 0.5 Hr.
OPERATION: SP3002A284-Check & Correct Front Toe
TIME:
0.6 Hr. - Two-wheel alignment equipment 0.2 Hr. - Four-wheel alignment equipment DLR. CODING: Basic Part No. 5500 Code: 36
