Tempo L4-140 2.3L CFI (1985)
8.
Reverse procedure to install. Install new circlip on inboard constant velocity joint stub shaft. Align splines of inboard constant velocity joint stub
shaft with splines in differential. Push joint into differential until circlip seats in side gear, Fig. 4. Torque new control arm to steering knuckle nut
to 40 ft. lbs. Torque new hub nut to 180---200 ft. lbs., and stake nut, Fig. 5. If the hub nut cracks or splits during staking, remove and replace
hub nut.
