Tempo V6-182 3.0L (1993)
Vehicles Affected:
1992-1993 3.8L Taurus/Sable
Required Parts:
F3DZ-14A003-BA
Installation Procedure:
1.
Open hood.
2.
Disconnect battery negative cable.
3.
Locate High Current Power Distribution Box in engine compartment at the left rear near the dash panel. Remove, mutilate and discard the Power
Distribution Box Cover.
4.
Remove the # 4 fuse (60 Amp - engine cooling fan motor) and replace it with the supplied 50 Amp Maxifuse.
5.
Install supplied High Current Power Distribution Box Cover.
6.
Connect battery negative cable.
7.
Check engine cooling fan motor for proper operation.
8.
Close hood.
9.
Apply supplied sticker onto appropriate page of Owner Guide as follows:
MODEL YEAR
VEHICLE LINE
PAGE NUMBER IN
PAGE NUMBER IN
ENGLISH OWNER GUIDE
FRENCH OWNER GUIDE
1992
Taurus
284
325
1992
Sable
282
317
1993
Taurus
300
339
1993
Sable
289
331
Sample of English Owner Guide Sticker Page:
Attachment III - Technical Instructions - Kit DD
Technical Instructions
Engine Cooling Fan Motor Wiring Harness Circuit Protection Modification
Kit DD Designated Vehicles
Vehicles Affected:
1992-1994 3.8L Lincoln Continental
Required Parts:
F43 - Z-14K095-DA
Installation Procedure
1.
Open hood. Disconnect battery negative cable.
2.
Remove the sight shield from above the radiator and engine cooling fan area.
3.
Disconnect existing vehicle wiring harness connector from cooling fan motor harness.
4.
Disengage cooling fan motor wire harness retainers from their locations on the shroud.