Tempo V6-182 3.0L (1993)
b.
The appropriate new PFE bracket is supplied with the appropriate large port service PFE sensor assembly (Figure 2).
2.
Install the appropriate large port service assembly (sensor, bracket and hose) in the new location on the intake manifold. Attach the bracket with
the existing bolt (Figure 2). Torque bolt to 20-30 N.m (15-22 lb-ft).
3.
Install the PFE sensor hose to the EGR tube with the clamp provided.
4.
Connect the electrical connector to the new PFE sensor.
5.
Clear DTC from Continuous Memory.
6.
Re-run Self Test and verify that pass codes are received in KOEO, KOER and continuous.
3.0L (1992-94)
1.
Remove the existing PFE sensor assembly (sensor, hose and bracket) from the upper intake manifold.
