Thunderbird L4-140 2.3L SOHC Turbo (1984)
FIGURE 8
8.
Transfer the squeeze bulb and valve assembly and the gauge from the inflating hose at the front of the seat cushion to the hose connection at the
rear of the seat as shown in Figure 8.
9.
Inflate the lumbar support system to 4 P.S.I.
10.
If the lumbar support system retains an acceptable amount of pressure (specified in Step 5) replace the inflating tube contained within the front
seat cushion. (Refer to Section 41-28 of the 1984 Thunderbird/Cougar Car Shop Manual). If the system does not retain an acceptable amount of
pressure proceed to Step 11.
11.
Remove the seat and track assembly from the vehicle. Refer to the removal procedures contained in Group 41 of the 1984 Thunderbird/Cougar
Car Shop Manual as indicated below:
^
Seats with manual seat tracks 41-01.
^
Seats with power seat tracks 41-08.
