ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine Lubrication > < Engine Mount|Service and Repair|Page 2074
Page 5
background image

Fig. 5 Engine mounts. 1983-84 Cougar & Thunderbird 4-140

1983-84 COUGAR, LTD, MARQUIS & THUNDERBIRD 4-140

1.

Support engine using a suitable jack and wooden block placed under oil pan.

2.

Remove fuel pump shield attaching screw, if equipped, from lefthand engine support bracket.

3.

On LTD and Marquis models, remove bolt securing lower end of engine damper to No. 2 crossmember bracket, Fig. 4.

4.

On Cougar and Thunderbird models, remove through bolts from bottom of mounts, Fig. 5.

5.

Remove nuts and washers attaching both insulators to No. 2 crossmember.

6.

Raise engine just enough to clear insulator studs from crossmember.

7.

Remove insulator and bracket attaching bolts, then the insulator and bracket assembly from vehicle.

8.

Reverse procedure to install.

Engine Lubrication > < Engine Mount|Service and Repair|Page 2074